DATO BLADE SERIES

The maximum possible width is about 1 inch, and almost every measurement less than that is achievable.ĭado blades that are 8 inches in diameter are made for a 10 inch saw since the blade is not for through cuts. This range of sizes means the width options are nearly endless. The chippers are 4 1/8 inches, 1 1/16 inches and 1 3/32 inches thick. The outer blades of the dado set are typically 8 inches in diameter and 1/8 inch thick. Woodworkers like stacked dado blades for their high performance and versatility. The chippers also determine the length of the cut. Outside of the outer blades are chipper blades that can be added or removed, depending on your cut width. These blades can be interspersed with spacers to achieve a precise cut.

DATO BLADE SERIES

The stacked dado blade is a series of blades in a stack that create a wider blade. You can set the amount of lead on the blade by rotating these plates, allowing you to get a custom cut. Though it does not “wobble,” it does sway while cutting to create an “S” pattern within the plate width - which you can adjust to your desired cut width. The wobble dado blade is a single blade with an offset rotation. There are two kinds of dado blades available. The method you use will depend on your table saw and dado blade set. Not all table saws are compatible with dado blades, so check your saw specifications. You can adjust the dado blade to control the width through adjusting the blade or changing the number of cutters you are using. What Type of Saw Uses a Dado Blade?ĭado blades are made for table saws. However, dado blades cut perfect joints and grooves much quicker than other methods.

You can use other methods to achieve the wide groove cut without a dado blade, including using a clamp guide with a handheld router or miter saws. Interlocking joints are common in making bookshelves, drawers, door panels and cabinets. They are used for interlocking applications. You will need a 30mm diameter parallel arbor at least 21mm in length.A dado blade is a circular saw blade that cuts grooves into the wood that are much wider than traditional saw blade cuts. If you are intending to use this dado head on any other brand of machine, please ensure that the machine is capable of mounting this cutter head securely. In use, you remove the riving knife on the table saw, using the quick release catch.īecause using this set necessitates the removal of the machines standard crown guard and riving knife, we strongly recommend the purchase and fitting of the S-12 Overhead Guard (104504) to these machines, which as well as providing additional user safety, has a much greater efficiency of dust extraction when used with a suitable extractor. A special 18mm wide kerf plate for the dado set is provided with the table saw. The dado head should never be used to cut through the timber, it is for machining grooves using light, multiple cuts.Īn accessory for the AT254TS and AT254LTS table saws, this set fits onto the 30mm blade arbor, using the standard blade clamp and nut. The inner chippers are 4 x 3.0mm, 1 x 2.2mm and 1 x 1.5mm. Simply select the inner chippers and spacers required to cut the width of slot required. The chippers and spacers fit between the outer TCT blades. This 204mm diameter Dado Blade Set comprises 2 x 24 tooth TCT outer blades, 6 inner chipper blades and 4 spacers.

Dato blade